Mircom FA-300 Series Manuel d'installation télécharger pdf (Page 65)

FA-300 Series LCD Version Installation and Operation Manual

Command Menu-->Dialer-Config

Dialer Enable/Disable

Command Menu-->Dialer-Config

Ring Detect

10. Test Dialer (Command-Menu)

Note: Refer to How to Use the Keypad to Program the FA-300 on page 39 for detailed instructions on

making menu selections.

[X] ENABLE ->Default

[ ] DISABLE

The dialer is enabled by default.

When the dialer is enabled or

disabled, a warning message

appears.

Warning: The dialer cannot report

any event to the monitoring station if it

is disabled.

[ ] Disabled

[ ] 1

[ ] 2

[ ] 3

[ ] 4

[X] 5->Default

[ ] 6

[ ] 7

[ ] 8

Use this menu item to select the

number of rings on which the panel’s

modem will answer. The default

number of rings is five. The maximum

number of rings you can define is

eight.

If you select the “Disabled” option, the

modem will be disabled and the panel

will not pick up the incoming call.

Note: Refer to How to Use the Keypad to Program the FA-300 on page 39 for detailed instructions on

making menu selections.

Press Enter to test Line #1. Press Cancel to exit

this menu. For a description of test messages,

see Dialer Test Messages on the following page.

Press Enter to test Line #2. Press Cancel to exit

this menu. For a description of test messages,

see Dialer Test Messages on the following page.

This feature flushes all reportable events from

the buffer. Press Enter to reset the dialer. Press

Cancel to exit this menu.

Dialer Ena/Dis

[X] ENABLE

------Warning-------

Dialer Disabled!!!

[X]5

-Ring Detect Number-

-Dialer Test-

1. L#1 Manual test

2. L#2 Manual test

3. Reset Dialer

1.L#1 Manual test

2.L#2 Manual test

3 Reset Dialer

1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 83 84

Commentaires sur ces manuels

Pas de commentaire

Mircom FA-300 Series Manuel d'installation Page 65

Commentaires sur ces manuels

Produits connexes et manuels pour Détecteurs de fumée Mircom FA-300 Series