FA-300 Series LCD Version Installation and Operation Manual
43
Command Menu-->FA-300 Config
Opt Zone
This menu is used to program the process type of the indicating circuits. The maximum number of indicating circuits
is four, but only those supported by the particular model will be shown.
Command Menu-->FA-300 Config
Correlation
Note: Refer to How to Use the Keypad to Program the FA-300 on page 39 for detailed instructions on
making menu selections.
Command Menu/FA-300 Config/Opt. Zone
1. Type (Indicating Circuits)
4.
[X] SIL-ABLE->Default
[ ] NON SIL-ABLE
[ ] SIL-ABLE STR
[ ] NON-SIL STR
Use this function to program
the process type of each
indicating circuit. See CIRCUIT
TYPE section for details.
Command Menu/FA-300 Config/
Correlation
1.Correlation
12.
[X] NAC-1 ->Default
[X] NAC-2 ->Default
[X] NAC-3 ->Default
[X] NAC-4 ->Default
Use this function to correlate
initiating circuits to the
indicating circuits. By default all
the initiating circuits are
correlated to all the indicating
circuits.
1 NAC-1
2 NAC-2
3 NAC-3
4 NAC-4
Indicating Zone
NAC-1 Type
[X] SIL-ABLE
NAC-4 Type
[X] SIL-ABLE
Zone-1 Corr.
[X] NAC-1
Zone-12 Corr.
[X] NAC-1
Commentaires sur ces manuels