Mircom TX3 Series Manuel de démarrage rapide télécharger pdf (Page 51)

Adding and Connecting to a Panel

Version 2.4 TX3 Configuration and Administrator Manual 51 (165)

2. Click Delete. A confirmation window appears. Click Yes to confirm the

deletion or No to exit and return to the main window.

3.2 Connecting to a Panel

The network configuration option lets you set the parameters required for the PC

to communicate with a single panel or a network of panels using a COM port,

Modem, USB or RS-485 connection. By default, the Touch Screen is connected

to the internal Telephone Access System Panel.

Note: Whenever configuring a network, first disconnect from that

network.

Each controller must be set with a level 3 passcode. By default this passcode is

3333.

Note: The level 3 panel passcode must match the network passcode in

order to connect to that panel. The level 3 passcode is initially set at

the panel.

When a panel is successfully connected, a message displays in the Lower Pane

Online Events indicating it is currently online. If unsuccessful an error message

appears.

Once connected the Connect toolbar button shows the ‘connected’ icon and

you can begin adding resident and card information.

To establish a network connection

1. If connected, Click Disconnect from the toolbar.

2. Establish the USB, modem, COM or RS-485 connection form the PC to

the controller.

Note: When using an RS-485 connection select Com Port from the PC

connection list.

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 164 165

Pas de commentaire

Mircom TX3 Series Manuel de démarrage rapide Page 51