Mircom TX3 Series Manuel de démarrage rapide télécharger pdf (Page 128)

128 (165) TX3 Configuration and Administrator Manual Version 2.4

Configuring a Card Access System Panel

3. Click OK to save the information and return to the configuration window,

or click Cancel to exit without saving the changes.

4. Click Send and Exit from the Tool Bar to apply the settings and exit

the session.

6.1.3 Configuring Access Points

Card readers at access points require additional configuration to specify how

certain access requirements run on a scheduled basis. Access privileges may

have dependencies and consequently may be more suitable to run as a scheduled

task.

To apply schedules, they must be first created using the Schedule Configuration

Window (see Chapter 7).

The auto lock/unlock scheduling for door operation allows free access without an

access card, during specified times and areas.

To configure access points

1. Expand the Access Point list and click on an access point. The Access

Point Configuration window appears.

Figure 93. Access Point Configuration - Timers

2. In the Access point label provide a name for the access point.

3. From the tab select Timers and provide information for each the

following:

1 2 ... 123 124 125 126 127 128 129 130 131 132 133 ... 164 165

Pas de commentaire

Mircom TX3 Series Manuel de démarrage rapide Page 128