Configuring a Card Access System Panel
Version 2.4 TX3 Configuration and Administrator Manual 133 (165)
LT-995 Copyright 2012
Handicap lock for reader A or B. This output is assigned to either reader A or
B to unlock the handicap access door. When access is granted at the designated
reader, this output unlocks the door. Access is granted to cards with designated
handicap privileges.
General purpose output. An output assigned this function can perform any
required function, such as turning on a light.
Outputs 1 to 8 have the following default settings:
Output 1. Lock for reader A
Output 2. Reader A handicap
Output 3. General Purpose
Output 4. General Purpose
Output 5. Lock for reader B
Output 6. Reader B handicap
Output 7. General Purpose
Output 8. General Purpose
Outputs 1 to 6 are dry relay contacts.
Outputs 7 and 8 are programmable and provide:
• 12 Vdc
• a maximum output of 700 mA each, for a combined total output of 1 A.
For example, if output 7 provides 700 mA, then output 8 provides 300
mA.
Commentaires sur ces manuels