136 (165) TX3 Configuration and Administrator Manual Version 2.4
Copyright 2012 LT-995
Configuring a Card Access System Panel
2. Click Add. The Add Correlation window appears.
Figure 98. Add Correlation
3. Enter the following parameters:
When. This parameter defines the input event. Select one of the
following:
Access is granted. Access is granted.
Access is denied. Access is denied.
Forced entry alarm. A door is forced open.
Door held open alarm. A door did not close.
Door not open. Access granted but the door remains closed.
Input is active. Select a panel input from 1 to 8 as defined in
paragraph 6.2.
Unlock mode is on. When in unlock mode the door is unlocked.
Unlock mode is off. When in lock mode the door is locked.
High security is on. When enabled only access cards with this
privilege are able to open the door.
Commentaires sur ces manuels