Mircom FA-1000 SERIES Manuel d'instructions télécharger pdf (Page 10)

DIP Switch Settings

On the RAX-1048(TZ) Adder

Annunciator Chassis:

P1: Connects to the Main Annunciator

Chassis, or to the previous Adder

Annunciator Chassis.

P2: Connects to the Next Adder

Annunciator Chassis.

On the RAM-1032(TZ) Main

Annunciator Chassis:

P2: Connects to the first Adder

Annunciator Chassis.

P3,P11: Not used.

Jumpers: Factory set. Do not change.

Terminals: See Wiring Instructions on

page 3 for details.

SW1, SW2: Set DIP Switches as

described in “DIP Switch Settings” on

page 4.

JW6: RS-485 termination jumper.

Remove on all except for last RAM-

1032(TZ).

On the RAM-1016(TZ) Main Annunciator Chassis:

P2: Not used. No expansion allowed.

P3,P11: Not used.

Jumpers: Factory set. Do not change.

Terminals: See Wiring Instructions on page 3 for details.

SW1, SW2: Set DIP Switches as described in “DIP Switch Settings” on page 4.

JW6: RS-485 termination jumper. Remove on all except for last RAM-1016(TZ).

ADDER ANNUNCIATOR BOARD

P2 P3 JUMPERS TERMINALS P11

SW1 SW2

MAIN ANNUNCIATOR BOARD

JW6

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 19 20

Pas de commentaire

Mircom FA-1000 SERIES Manuel d'instructions Page 10